NSK 130RUBE41E1PV Thrust Tapered Roller Bearing

Raceway Ring Shape:Self-aligning roller; Days to Ship:10 Days; Inner/Outer Ring Material:Steel; Retainer Type:Punching; Inner/Outer Ring Material:Steel; Shaft Bore Config.:Cylindrical Bore; Rolling Element Material:Steel; d:65; Bearing Ring:With Oil Hole, Oil G; Raceway Ring Shape:Self-aligning roll

Dz:60 mm; Designation of housing:FL205N-; S:14.3 mm; Designation of bearing:UC205-14G2L4; T max.:100 °C; Designation of open end cover:SCOU205-14; C:14 kN; H:130 mm; d:22.22 mm; N:16mm;

Bearing Inner Dia. Shape:Cylindrical Bore Set; Diameter series symbol:Used for Light load; Basic Load Rating, Static Rating(N):40100; Bearing Unit, Type:Cartridge type unit; Stroke:No; Grease Type:Standard Grease; Surface Treatment:No; Machining:No; Unit, Type:Insert Bearing Unit; d:65;

Type:Bearings with Housin; Number of Bearings:Single; Height Indication:Height Selection; Bearing I.D. d(mm):10; Housing Material:[Aluminum Alloy] Alu; Shape:T-Shaped; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6800;

Lateral Width L(mm):76; Shape:T-Shaped; Type:Bearings with Housin; Height H(mm):25 ～ 50; Bearing Material:[Steel] Steel; Bearing Part Number:6203; RoHS:6; Seals:DD (Contact Rubber S; Shape:T-Shaped; C Chamfered:Provided;

Unit Body Material:Cast Iron; Bearing Unit, Type:Take-Up Type; Basic Load Rating, Static Rating(N):119000; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Rolling Element Material:Bearing Steel; d:85; Grease Type:SH33M; Bearing Unit, Type:Take-Up Type; Fit:J7;

N:13mm; H:70 mm; d1:32.4 mm; T max.:100 °C; G:M6x1; J:95 mm; L:127 mm; Designation of bearing:EX204G2; d:20 mm; Recommended tightening torque for set screw:5.5 Nm;

RoHS:6; Accessory:No Cover; Seal:Silicone; Grease Type:SH44M; Pillow Type, Category:Standard; Surface Treatment:No; Basic Load Rating, Static Rating(N):48300; Stroke:No; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit;

Number of Bearings:Double; Bearing Part Number:6902; Bearing Retained:No; Shape:Block; Bearing Retained:No; Housing Material:1045 Carbon Steel; RoHS:6; T(mm):25 ～ 50; Type:Bearings with Housin; Housing Material:1045 Carbon Steel;

A:49 mm; Z:74.6 mm; d:47.62 mm; S:19 mm; C:35.1 kN; SW:4.76 mm; s1:25.8 mm; Designation of bearing:UC210-30G2; H2:83 mm; T max.:100 °C;

N1:19 mm; Designation of bearing:US203G2T20; T max.:200 °C; S:6 mm; H2:62 mm; Z:45 mm; Weight:0.62 kg; B:22 mm; N:13mm; Designation of open end cover:SCO203-17;

d:25.4 mm; H:95.2 mm; Weight:0.38 kg; B:21.4 mm; T max.:100 °C; S:7.5 mm; Recommended tightening torque for set screw:3.7 Nm; d1:37.4 mm; J:76 mm; Designation of housing:PF205-;

Shape:Flange Type; Type:Bearings with Housin; Shape:Flange Type; Housing Material:[Aluminum Alloy] 201; Bearing Part Number:6003; Volume Discount:Available; RoHS:6; Days to Ship:7 Days; Bearing Material:[Steel] Steel; Width T(mm):12;

Bearing Unit, Type:Take-Up Type; Surface Treatment:No; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:Standard Grease; Basic Load Rating, Static Rating(N):6650; Fit:J7; Accessory:No Cover; Machining:No; d:20;

Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Number of Bearings:Double; Holder Surface Treatment:Not Provided; Number of Bearings:Double; Bearing Part Number:6202; Bearing Retained:No; Shape:Flanged Pilot Type; Housing Material:304 Stainless Steel; Seals:DD (Contact Rubber S;