Timken 28580 28523 Tapered roller bearing

Oil Speed Rating n2:4500 rpm; Sealed Speed Rating n3:3400 rpm; Basic Static Radial Load Rating Co:143000 N; Basic Dynamic Radial Load Rating C:134000 N; D:130.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3400 rpm; d:60.000 mm; B:57.20 mm; Accessories:One Shield & Snap-Ri;

Accessories:Two Seals & Snap-Rin; Basic Dynamic Radial Load Rating C:63700 N; D:145.0000 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; d:95.000 mm; B:24.00 mm; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:54000 N; Grease Speed Rating Open/Shielded n1:4500 rpm; Fillet Radius

Stabilizing ring:2 x 38151-24; RG:3/8 NPT; L:387.35 mm; R2:30.163 mm; P180°:55.6 kN; End plug (suffix Y):EPR 14; ba:46.831 mm; Da:180 mm; Pa:16.7 kN; H2:44.45 mm;

r2s (min):0.6 mm; Pu:27.440 kN; D:160 mm; B:30 mm; T:32.5 mm; Static (Coa):242 kN; C:26 mm; a:31 mm; r1s (min):2 mm; d2:90 mm;

Mass adapter sleeve assembly:4.75 kg; d:140 mm; Lock nut:AN 28; B:24.079 mm; B4:27 mm; B1:100.863 mm; Threads per inch:12; Sleeve:S 28x4.13/16; G:139.624 mm; Lock washer:W 28;

D2:136 mm; db max.:113.5 mm; Calculation factor fHC:1.01; Calculation factor f2C:1.05; Basic static load rating C0:40 kN; Da max.:143 mm; Calculation factor f2B:1.03; Preload class B GB:720 N; ra max.:1.5 mm; Fatigue load limit Pu:1.5 kN;

T:648 mm; r1,2 min.:6 mm; Calculation factor Y2:3.3; Thrust factor K:1.83; Calculation factor Y0:2.2; Fatigue load limit Pu:2500 kN; Calculation factor Y1:2.2; B:648 mm; Calculation factor e:0.31; d1 ≈:760 mm;

H1:95 mm; N4 max.:8 mm; H:177 mm; End cover:ASNH 516-613 R; P120°:190 kN; Oil seal:2 x TSN 613 U; Cap bolt, rec. tightening torque:80 N·m; J1:50 mm; Adapter sleeve:H 2313; Pa:140 kN;

D:19.1000 mm; Basic Dynamic Radial Load Rating C:2810 N; Sealed Speed Rating n3:27000 rpm; Basic Static Radial Load Rating Co:1160 N; Grease Speed Rating Open/Shielded n1:39000 rpm; Shielded or Sealed B1:7.1 mm; Accessories:One Shield; d:6.400 mm; Fillet Radius ra:0.41 mm; Oil Speed Rating Open/Shie

E:mm; B:58 mm; rs (min):4 mm; Dynamic (Ca):779 kN; d2:200 mm; r1s (min):4 mm; b1:23 mm; F:243 mm; d2 (max):258.2 mm; Static (Coa):1000 kN;

Limiting speed:75000 r/min; Calculation factor kr:0.02; Da max.:7.5 mm; ra max.:0.1 mm; Reference speed:150000 r/min; D:8 mm; r1,2 min.:0.1 mm; da max.:4.9 mm; Basic dynamic load rating C:0.225 kN; d1 ≈:5 mm;

Sealed Speed Rating n3:5000 rpm; Oil Speed Rating n2:6700 rpm; Basic Static Radial Load Rating Co:54000 N; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:51200 N; d:45.000 mm; D:85.0000 mm; Accessories:No Shield, no Seal; Grease Speed Rating n1:5000 rpm; B:30.20 mm;

Grease Speed Rating Open/Shielded n1:2100 rpm; D:320.0000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:260000 N; Oil Speed Rating Open/Shielded n2:2600 rpm; B:70.00 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:270000 N; d:110.000 mm; Sealed Speed Rating n3:1500

Hydraulic nut:HMVC 96E; d:480 mm; B5:74.6 mm; B1:322.936 mm; Threads per inch:5; d3 max.:560.527 mm; G:478.993 mm; Sleeve:S 3196x18; B:60.579 mm; Lock nut:N 096;

Basic Dynamic Radial Load Rating C:11200 N; Grease Speed Rating n1:11000 rpm; Fillet Radius ra:0.64 mm; d:35.000 mm; D:55.0000 mm; B:10.00 mm; Basic Static Radial Load Rating Co:9000 N; Fillet Radius rb:0.15 mm; Oil Speed Rating n2:14000 rpm;